2019+ Ram Heavy Duty - Steps to Reroute Camera Image from Rear View Mirror to Radio Display

1. Ensure you have a replacement radio capable of utilizing an analog camera input.

2. Locate the XY340A Jumper Connector located on the right side of the dash. *If you remove the closeout panel at the passenger side of the dash you will see it.

3. Locate the following pins:

PIN 5 (DG/BN) – Camera Signal

PIN 6 (DG/OG) – Camera Return

PIN 7 (NA) – Camera Shield

4. Reroute the pins above to the following pins on the radio connector:

PIN 31 (DG/BN) – Camera Signal

PIN 32 (DG/OG) – Camera Return

PIN 33 (NA) – Camera Shield

5. If PINs 31/32/33 are not currently populated on your radio connector, utilize our C-INTC4T Interface for an easier connection.